18 Volt Batteries for DeWalt Power Tools: BATWAYPRO 5.0Ah Ni-MH
The BATWAYPRO 18V 5.0Ah Ni-MH is an aftermarket two-pack sold as a replacement for older DeWalt 18V XRP-type cordless tools. It is not a DeWalt battery, and it does not replace DeWalt’s newer slide-in 20V MAX packs.
This page contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.
Will This Battery Work in Your DeWalt Tool?
This is an older pod-style 18V pack. No model-by-model fit list was found – you need to confirm the match yourself. Run this quick check before you buy.
The BATWAYPRO listing also names DC9071 and DW9071, but DeWalt documents both as 12V packs. This battery is advertised as 18V, so do not buy it for those two. Also confirm physical fit, because matching voltage alone does not prove a pack will fit your tool.
BATWAYPRO 18V 5.0Ah Ni-MH Specifications
| Property | Detail |
|---|---|
| Brand | BATWAYPRO (aftermarket, not DeWalt) |
| Product | Upgraded 18V Replacement Battery for DeWalt 18V XRP Type Tools, 5.0Ah Ni-MH, 2-Pack |
| Amazon ASIN | B0FTLL44ZG |
| Type | Rechargeable tool battery pack |
| Chemistry | Nickel-metal hydride (Ni-MH), as advertised |
| Nominal voltage | 18 V, as advertised |
| Capacity per battery | 5.0 Ah (5,000 mAh), as advertised |
| Energy per battery | 90 Wh (calculated: 18 V × 5.0 Ah) |
| Pack contents | 2 batteries |
| Intended platform | Older DeWalt 18V XRP-type pod tools |
| Listed 18V references | DC9096, DW9095, DW9096 (18V per DeWalt and retailer listings) |
| Listed, not verified | DE9096, DE9098 |
| Listed, but 12V | DC9071, DW9071 (not for this 18V pack) |
| Pack size and weight | Not verified |
| Charge time and runtime | Not verified |
| Cell maker, safety circuit, certification | Not verified |
| Approved charger list | Not verified |
Ratings come from the BATWAYPRO Amazon listing and were not lab tested. For reference, an original DeWalt DC9096 is a 2.4Ah Ni-Cd pack, so the two are not the same type.
DeWalt 18V Battery Replacement Difficulty
Swapping a detachable pack is easy. It needs no tools, no disassembly and no soldering. iFixit calls battery removal on the DeWalt DC970 very easy. The harder part is matching the tool, battery and charger before you buy. Tap a slice to highlight it.
- 15% Removing the old pack
- 15% Fitting the new pack
- 45% Matching tool, battery and charger
- 25% First charge & test run
The score and effort split are an editorial estimate, not an official rating. They apply to swapping a complete external pack only. DeWalt’s instructions say not to open a battery pack.
How to Replace the Battery in a DeWalt 18V Tool
Tap each step to tick it off as you go.
- 1Confirm the matchCheck that your tool is an older DeWalt 18V model and that your old pack is an 18V pack.
- 2Charge the new batteryUse a charger that is confirmed for Ni-MH packs and for this battery.
- 3Remove the old batteryRelease the trigger, set the forward/reverse control to the centre lock position if your tool has one, then press the release buttons and pull the pack out of the handle.
- 4Fit the new batteryLine the pack up with the notch inside the handle and slide it in until the lock snaps into place.
- 5Test the toolCheck that the pack is held firmly, clear the work area, then run a short test.
Do not force the pack in. Never trim, file or modify a battery, charger or tool to make it fit. Stop and recheck your tool model and old battery number.
DeWalt 18V Tools From the Same Battery Family
DeWalt or major retailers list these older tools as 18V. Fit with this pack is not confirmed for each one. Check your exact model first.
- DC97018V drill/driver
- DC75918V drill/driver
- DC39018V circular saw
- DC38518V reciprocating saw
- DC82518V impact driver
- DC82718V impact driver
- DC82118V impact wrench
- DW05918V impact wrench
- DW91918V flexible floodlight
Safety, Charging & Disposal
This is an aftermarket pack. DeWalt manuals say to charge DeWalt packs only in DeWalt chargers, therefore their charger approvals do not extend to this battery. No product-specific certification was verified.
- Use only a charger confirmed for Ni-MH packs and for this battery.
- Never open, crush or modify a battery pack.
- Do not use a pack that is cracked, damaged or leaking.
- Keep terminals away from keys, coins, screws and other metal objects.
- Take used packs to a battery collection point, not household trash.
BATWAYPRO 18V Battery: FAQ
What is the BATWAYPRO 18V 5.0Ah Ni-MH battery?
It is an aftermarket two-pack of 18V 5.0Ah nickel-metal hydride batteries, advertised as replacements for older DeWalt 18V XRP-type tools.
Is it an original DeWalt battery?
No. It is sold under the BATWAYPRO brand. No DeWalt approval or DeWalt warranty coverage has been established.
Can it replace a DC9071 or DW9071 battery?
No. The BATWAYPRO listing mentions both, but DeWalt documents them as 12V packs. This battery is advertised as 18V.
Does it fit every DeWalt 18V tool?
No. It is aimed at older pod-style packs, not DeWalt’s newer slide-in 20V MAX batteries.
Which charger should I use?
An approved charger list was not found. DeWalt manuals say to charge DeWalt packs only in DeWalt chargers. Use a charger that is confirmed for Ni-MH packs and for this battery, and never force or modify a pack to fit.
How long does it take to charge, and how long does it run?
No verified charge time or runtime was found. Runtime depends on the tool, the load and the charger used, and the 5.0Ah figure is an advertised rating.
