Canon EOS Rebel T6 Camera Battery: Eeyrnduy LP-E10
The Canon EOS Rebel T6 runs on one LP-E10 rechargeable lithium-ion battery. The Eeyrnduy LP-E10 is an aftermarket two-pack advertised at 7.4 V and 1600 mAh per battery.
This page contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.
Will This Battery Work in Your Camera?
Canon lists the LP-E10 as the battery for the EOS Rebel T6 (also sold as the EOS 1300D). The Eeyrnduy listing names the T6 as compatible. Run this quick check before you buy.
The Rebel T6 and the Rebel T6i are different cameras. The T6 uses the LP-E10, while the T6i uses the LP-E17. This is an aftermarket battery and it is not Canon approved.
Eeyrnduy LP-E10 Specifications
| Property | Detail |
|---|---|
| Brand / model | Eeyrnduy LP-E10 (2-pack, ASIN B0CRB4556M) |
| Battery type | Rechargeable lithium-ion, replaces Canon LP-E10 |
| Nominal voltage | 7.4 V |
| Advertised capacity | 1600 mAh per battery |
| Advertised energy | 11.84 Wh per battery |
| Pack contents | Two batteries. No charger is included. |
| Listed manufacturer | Dongguan Yien Technology Co., Ltd. |
| Cameras named in the listing | Rebel T3, T5, T6, T7; Kiss X50, X70; EOS 1100D, 1200D, 1300D, 2000D |
| Charger | Sold separately. Canon specifies the LC-E10 or LC-E10E for its original LP-E10. |
| Warranty | 12 months advertised |
| Canon LP-E10 voltage (reference) | 7.4 V DC |
| Canon LP-E10 capacity (reference) | 860 mAh |
| Canon LP-E10 size (reference) | About 36.2 × 14.7 × 49.0 mm (W × H × D) |
| Canon LP-E10 weight (reference) | About 45 g |
| Canon LP-E10 temperature (reference) | Charging 6°C to 40°C; shooting 0°C to 40°C |
| Not published | Size, weight, cycle life and certification documents for the Eeyrnduy battery |
Eeyrnduy figures come from product listings and have not been independently tested. The rows marked “reference” describe Canon’s original LP-E10 and do not apply to the Eeyrnduy battery.
Rebel T6 Battery Replacement Difficulty
This is an easy job. The battery sits behind a cover on the camera, and Canon’s steps need no tools, screws or disassembly. The harder part is picking the right battery. Tap a slice to highlight it.
- 20% Powering off & waiting for the lamp
- 20% Opening the cover & lock
- 40% Choosing the right battery
- 20% Seating the battery & closing
The difficulty score and effort split are an editorial estimate based on Canon’s documented procedure, not an official rating.
How to Replace Your Rebel T6 Battery
Charge the new battery first. Tap each step to tick it off as you go.
- 1Switch off and waitSet the power switch to OFF. Wait until the access lamp is no longer lit or blinking before you open the cover.
- 2Open the coverSlide the compartment cover release lever and open the cover. Do not swing it back too far, as the hinge can break.
- 3Remove the old batteryPress the battery lock lever in the direction shown and take the battery out. Fit its protective cover to keep the contacts safe.
- 4Insert the new LP-E10Push the new battery in contact end first until it locks in place. Your memory card can stay in the slot.
- 5Close the coverPress the cover until it snaps shut.
- 6Power on and checkSwitch the camera on and look at the battery level icon. Canon shows the charge in four levels.
Canon says a battery that runs out quickly even after a full charge has worn out. A blinking orange lamp on the Canon charger means its protection circuit has stopped charging because of a problem.
Other Cameras That Use an LP-E10
The cameras below use the LP-E10 format. Models marked “Named in the listing” appear in the Eeyrnduy pack’s title. The others use the same battery but are not named there. No use outside cameras was found. Confirm the battery type in your camera manual first.
- Rebel T3Named in the listing
- Rebel T5Named in the listing
- Rebel T6The camera in this guide
- Rebel T7Named in the listing
- Rebel T100Uses the LP-E10
- EOS 1100DNamed in the listing
- EOS 1200DNamed in the listing
- EOS 1300DRegional name of the Rebel T6
- EOS 1500DUses the LP-E10
- EOS 2000DNamed in the listing
- EOS 3000DUses the LP-E10
- EOS 4000DUses the LP-E10
- Kiss X50Named in the listing
- Kiss X70Named in the listing
- Kiss X80Regional name of the Rebel T6
- Rebel T3iUses the LP-E8 battery
- Rebel T5iUses the LP-E8 battery
- Rebel T6iUses the LP-E17 battery
- Rebel T7iUses the LP-E17 battery
Safety, Charging & Storage
Stop using and charging any battery that is leaking, smoking or running hot. Canon also warns that its LP-E10 is for Canon products only, and that an incompatible charger or product can cause malfunction or accidents.
- Never open, modify, short-circuit or heat the battery.
- Fit the protective cover on a removed battery to protect the contacts.
- Canon rates its original LP-E10 for charging at 6°C to 40°C. Eeyrnduy lists no range, which makes this a cautious guide.
- Remove the battery when the camera is not in use, and avoid storing it fully charged.
- Follow your local battery recycling rules. Do not put used batteries in household trash.
Canon Rebel T6 Battery: FAQ
What battery does the Canon EOS Rebel T6 use?
The Canon EOS Rebel T6 uses one LP-E10 rechargeable lithium-ion battery. Canon’s original LP-E10 is rated at 7.4 V and 860 mAh.
Is the Eeyrnduy LP-E10 compatible with the Rebel T6?
The listing names the Rebel T6 as compatible, and the T6 uses the LP-E10 format. It is an aftermarket battery, not a Canon product, and no independent fit or runtime test was found.
Does it work with the Rebel T6i?
No. The T6i uses the LP-E17 battery, not the LP-E10.
Does the pack include a charger?
No. The listing is for two batteries only. Canon specifies the LC-E10 or LC-E10E charger for its original LP-E10, so check charger compatibility before you buy one.
Can I charge the battery through the camera’s USB port?
No. The Rebel T6 does not charge its battery over USB. The battery charges in an external charger.
Does 1600 mAh mean twice as many photos?
Not necessarily. The 1600 mAh figure is an advertised capacity, and no independent runtime test was found. For reference, Canon rates its original battery at about 600 shots at 23°C with the viewfinder and no flash.
Do I need to remove the memory card to change the battery?
No. Canon treats battery removal and card removal as separate steps, meaning the card can stay in the camera.
How should I store a spare LP-E10?
Canon advises removing the battery when the camera is not in use, keeping the protective cover on, and avoiding long storage at full charge.
