Canon EOS Rebel T7 Battery Replacement: SG10 LP-E10
The ZODELOW SG10 LP-E10 is a two-battery kit with a dual USB charging case. It is sold as a replacement power source for the Canon EOS Rebel T7. Each battery is advertised at 7.2V and 1600mAh, and the swap needs no tools.
This page contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.
Will This Battery Work in Your Rebel T7?
The Rebel T7 uses one Canon LP-E10 battery. ZODELOW sells this kit as an LP-E10 replacement, but it is a third-party product that Canon does not document. Run this quick check before you buy.
The Rebel T7i uses a different battery, the LP-E17, and LP-E10 listings generally exclude the T3i, T5i, T6i and T7i.
ZODELOW SG10 LP-E10 Specifications
| Property | Detail |
|---|---|
| Brand / model | ZODELOW SG10 (retail listing for Amazon ASIN B0FPLD1M3Z) |
| Replaces | Canon LP-E10 battery pack |
| Kit contents | 2 batteries + 1 dual-slot USB charger case |
| Chemistry | Lithium-ion, rechargeable |
| Voltage (advertised) | 7.2 V |
| Capacity (advertised) | 1600 mAh per battery |
| Charger USB input | 5 V, 2 A |
| Charger slot output | 8.4 V, 1 A (one battery) or 0.5 A each (two batteries) |
| Display | Digital battery-level display |
| Card storage | 2 SD card slots in the case |
| Compliance fields listed | CE, FCC, RoHS |
| Not found in listings | Battery size and weight, cycle life, full charge time, warranty term |
| Canon LP-E10 (reference) | 7.4 V, 860 mAh, about 36.2 × 14.7 × 49.0 mm, about 45 g |
ZODELOW values are advertised in retail listings and were not independently tested. Listings for similar kits use other model labels, which means details can differ by region and SKU. The last row is Canon’s original battery, shown for reference only.
Rebel T7 Battery Replacement Difficulty
Swapping the battery is a tool-free job through the compartment on the camera’s underside. The harder part is buying a pack that fits and charging it before you need it. Tap a slice to highlight it.
- 15% Opening the compartment
- 15% Swapping the battery
- 45% Choosing a compatible battery
- 25% Charging & checking the indicator
Difficulty score and effort split are an editorial estimate based on Canon’s documented battery procedure, not an official rating.
How to Replace Your Rebel T7 Battery
Charge the new battery first. Then tap each step to tick it off as you go.
- 1Switch the camera offSet the power switch to OFF and wait until the access lamp is off.
- 2Open the compartment coverSlide the release lever on the underside and open the card slot and battery cover. Do not swing it back past its normal stop, because the hinge can break.
- 3Remove the old batteryPress the battery lock lever and take out the old LP-E10. Fit its protective cover if you have one.
- 4Insert the new batteryAlign the battery contacts with those inside the camera and push the battery in until it locks.
- 5Close the cover and checkClose the cover until it snaps shut. Turn the camera on and check the battery indicator.
Check that the battery is charged, seated correctly and that the cover is fully closed. If the camera shows an error, follow Canon’s guidance for that error message.
Other Cameras That Use an LP-E10
ZODELOW lists the kit for the cameras below. Canon lists LP-E10 for the underlying EOS bodies. The Kiss names are regional names for the same bodies. Check your camera manual before you buy.
- EOS Rebel T7Canon-confirmed LP-E10
- EOS Rebel T100Canon-confirmed LP-E10
- EOS Rebel T6Same body as EOS 1300D
- EOS Rebel T5Canon-confirmed LP-E10
- EOS Rebel T3Canon-confirmed LP-E10
- EOS 1100DCanon-confirmed LP-E10
- EOS 1200DCanon-confirmed LP-E10
- EOS 1300DCanon-confirmed LP-E10
- EOS 1500DCanon-confirmed LP-E10
- EOS 2000DCanon-confirmed LP-E10
- EOS 3000DCanon-confirmed LP-E10
- EOS 4000DCanon-confirmed LP-E10
- EOS Kiss X50Same body as EOS 1100D
- EOS Kiss X70Same body as EOS 1200D
- EOS Kiss X80Same body as EOS 1300D
- EOS Kiss X90Same body as EOS 2000D
Rebel T3i, T5i, T6i and T7i bodies are not LP-E10 cameras, and LP-E10 listings generally exclude them. The T7i uses the LP-E17 battery.
Safety, Storage & Charging
Canon warns that using an LP-E10 with an incompatible charger or product may cause malfunction or accidents. The listing does not confirm cross-brand charging, so charge the ZODELOW batteries in the supplied case.
- Never open the compartment or remove the battery while the access lamp is on or blinking.
- Charge a new battery before first use, because batteries are not shipped fully charged.
- Take the battery out if you will not use the camera for a long time.
- Store spare batteries with a protective cover on the contacts.
- Avoid storing batteries fully charged for long periods, as this can lower performance.
- Take worn-out batteries to a battery recycling point, not household trash.
ZODELOW LP-E10 for Rebel T7: FAQ
What battery does the Canon EOS Rebel T7 use?
The Rebel T7 uses one Canon LP-E10 rechargeable lithium-ion battery pack at a time.
Is the ZODELOW SG10 LP-E10 made for the Rebel T7?
ZODELOW markets the kit as an LP-E10 replacement for the Rebel T7 and other LP-E10 cameras.
Is the ZODELOW battery really 1600mAh?
1600mAh is the advertised rating for each battery. No independent capacity test was found. Canon rates its original LP-E10 at 860mAh, but a higher number on the label does not guarantee a longer runtime.
How long does the original LP-E10 last in a Rebel T7?
Canon rates a fully charged original LP-E10 at about 500 shots through the viewfinder with 50% flash use at 23°C, and about 240 shots in Live View. Movie shooting is about 1 hour 30 minutes. These figures apply to the original Canon battery, not the ZODELOW pack.
Can the Rebel T7 charge its battery through USB?
No. Canon documents charging the removable LP-E10 in an external charger. The camera’s USB terminal is for communication functions, not battery charging.
Will changing the battery erase my photos?
No. Photos are stored on the memory card. Wait until the access lamp is off before opening the compartment or removing the battery. Removing it during card activity can damage image data, the card or the camera.
Does this kit work in a Rebel T7i?
No. The T7i uses the LP-E17 battery, and LP-E10 listings generally exclude the T3i, T5i, T6i and T7i.
Does the charging case read SD cards or resist water?
The case has two SD card storage slots. A working card reader and a waterproof rating were not confirmed. Treat the case as a charger and card holder only.
