Canon Camera Battery LP-E10 for EOS DSLRs
The Canon LP-E10 is a rechargeable lithium-ion camera battery rated at 7.4V and 860 mAh. It powers selected Canon EOS DSLRs, including the Rebel T7. It weighs about 45 g, charges in about two hours, and you can swap it in without any tools.
This page contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.
Will This Battery Work in Your Canon Camera?
The LP-E10 fits selected Canon EOS DSLRs only. Canon lists the Rebel T3, T5, T6, T7, T7+ and T100, plus matching EOS and EOS Kiss models. Run this quick check before you buy.
Similar camera names can use different batteries. The Rebel T3i and T5i use the LP-E8, and the Rebel T7i uses the LP-E17. Check your exact model in the camera manual.
Canon LP-E10 Specifications
| Property | Detail |
|---|---|
| Brand / model | Canon Battery Pack LP-E10 |
| Canon part number | 5108B002 (5108B001 in Japan) |
| Type | Rechargeable lithium-ion |
| Rated voltage | 7.4 V DC |
| Rated capacity | 860 mAh |
| Nominal energy (calculated) | About 6.36 Wh (7.4 V × 0.86 Ah) |
| Dimensions | Approx. 36.2 × 14.7 × 49.0 mm (W × H × D) |
| Weight | Approx. 45 g (without protective cover) |
| Charging temperature | +6°C to +40°C (43°F to 104°F) |
| Shooting temperature | 0°C to +40°C (32°F to 104°F) |
| Operating humidity | 85% or less |
| Canon chargers | LC-E10 and LC-E10E (LC-E10C in some regions) |
| Charge time | About 2 hours from empty at 23°C (73°F) |
| Charger lamp | Orange while charging, green when fully charged |
| Terminal protection | Protective cover for storage |
| Rebel T7 stills (viewfinder) | About 500 shots at 23°C, 50% flash use (CIPA) |
| Rebel T7 stills (Live View) | About 240 shots at 23°C, 50% flash use (CIPA) |
Shot counts belong to the Rebel T7 and Canon’s test conditions. Other cameras and shooting styles give different results. Specifications can vary by region.
LP-E10 Battery Replacement Difficulty
This is an easy job. It needs no tools and no camera disassembly. The cover has a release lever, the battery has a lock lever, and the pack slides in. The main risk is buying the wrong model. Tap a slice to highlight it.
- 20% Switching off & checking the lamp
- 20% Opening the cover & lock
- 25% Seating the new battery
- 35% Choosing the right battery
Difficulty score and effort split are an editorial estimate based on Canon’s replacement instructions, not an official rating. A swollen, leaking or stuck battery is not a routine swap.
How to Replace Your LP-E10 Battery
These steps follow Canon’s Rebel T7 instructions. Other models may differ slightly, which is why your camera manual is worth a quick look. Charge the new battery first. Tap each step to tick it off as you go.
- 1Switch off the cameraSet the power switch to OFF. Wait until the access lamp is off before you open anything.
- 2Open the battery compartmentSlide the cover release lever and open the cover. Do not force it past its normal travel, as the hinge can break.
- 3Remove the old batteryPress the battery lock lever and take the battery out. Fit its protective cover to keep the terminals safe.
- 4Insert the charged LP-E10Insert the contact end first and push the battery in until it locks.
- 5Close the coverClose the compartment cover until it snaps shut, then switch the camera on and check the battery level.
Check that the battery is pushed in until it locks and the cover is fully closed. Then confirm the battery is charged. If the camera still fails to start, check your camera manual or contact Canon support.
Cameras That Use the LP-E10
Canon sells the same cameras under different names in different regions. For example, the Rebel T7 is also the EOS 2000D, EOS 1500D and EOS Kiss X90. Confirm your exact model in the camera manual.
- EOS Rebel T3DSLR
- EOS Rebel T5DSLR
- EOS Rebel T6DSLR
- EOS Rebel T7Also EOS 2000D / 1500D
- EOS Rebel T7+Listed by Canon Brazil
- EOS Rebel T100Also EOS 4000D
- EOS 1100DDSLR
- EOS 1200DDSLR
- EOS 1300DDSLR
- EOS 1500DSame camera as Rebel T7
- EOS 2000DSame camera as Rebel T7
- EOS 3000DDSLR
- EOS 4000DSame camera as Rebel T100
- EOS Kiss X50Japan model name
- EOS Kiss X70Japan model name
- EOS Kiss X80Japan model name
- EOS Kiss X90Same camera as Rebel T7
Charging, Storage & Disposal
A swollen battery is damaged and can be a fire hazard. Stop using and charging it. Do not puncture it or force it out of the camera. Ask a repair professional or your local hazardous-waste service for help.
- Charge with a Canon LC-E10 or LC-E10E charger, from +6°C to +40°C.
- Remove the battery and unplug the charger once charging is done.
- Take the battery out of the camera for long storage and fit the protective cover.
- Avoid storing it fully charged for long periods, as this can reduce performance.
- Keep used batteries out of household trash and recycling bins.
- Cover the terminals and use a battery collection point.
Canon LP-E10: FAQ
Which Canon cameras use the LP-E10?
The LP-E10 fits selected Canon EOS DSLRs, including the Rebel T3, T5, T6, T7, T7+ and T100, plus regional EOS 1100D, 1200D, 1300D, 1500D, 2000D, 3000D and 4000D models and EOS Kiss X50, X70, X80 and X90.
How long does an LP-E10 take to charge?
Canon states about 2 hours for a fully exhausted battery at 23°C (73°F) in the LC-E10 or LC-E10E charger. It can take longer in cold conditions.
Can I charge the LP-E10 inside a Rebel T7 with a USB cable?
No. Remove the battery from the camera and charge it in the external charger. The camera’s USB port is for data transfer.
How many shots does an LP-E10 give?
It depends on the camera and how you shoot. In the Rebel T7, Canon rates a fully charged LP-E10 at about 500 viewfinder shots at 23°C with 50% flash use, under CIPA test conditions. Live View shooting gives fewer shots.
Is a third-party LP-E10 the same as the Canon original?
No. Capacity, build and warranty can differ. Canon’s original is rated at 7.4 V and 860 mAh, and Canon advises using its own LC-E10 or LC-E10E charger. A hologram on the packaging is a useful clue, but it does not prove a battery is genuine.
When should I replace my LP-E10?
Replace it when it runs out quickly even after a full charge. Canon gives no fixed lifespan in years, which means real-world performance is the best guide.
How should I dispose of a used LP-E10?
Do not put it in household trash or recycling bins. Use a battery recycling or household hazardous-waste service and cover the terminals with tape or the protective cover first.
