Battery for Cub Cadet XT1 LT46: 12V AGM, 210 CCA
The Cub Cadet 490-280-F017 is a 12-volt, 11 Ah AGM starting battery with a 210 CCA rating. Cub Cadet and parts dealer records list this battery family for selected XT1 LT46 models.
This page contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.
Will This Battery Fit Your XT1 LT46?
Not every tractor sold as an XT1 LT46 uses the same battery. Cub Cadet matches parts by the 11-character model number, so run this quick check before you buy.
Published specs for the XT1 LT46 name do not agree. Cub Cadet Canada lists a 210 CCA AGM battery for the 2024 model 13B6A9TTA10. For model 13APA9TTA10, Cub Cadet’s US page lists a 230 CCA lead-acid battery, while dealer pages list 210 CCA AGM and a parts dealer lists the 725P17335 battery for 2022 and 2023. Confirm against your own parts diagram and old battery label.
Cub Cadet 12-Volt AGM Battery Specifications
| Property | Detail |
|---|---|
| Brand / part number | Cub Cadet 490-280-F017 (listed as BATTERY-11AHR AGM N) |
| Related part numbers | 725P17335, 725-17335, 925-17335 (cross-referenced by Cub Cadet and parts dealers) |
| Battery type | AGM (Absorbent Glass Mat) lead-acid, rechargeable |
| Nominal voltage | 12 V |
| Rated capacity | 11 Ah |
| Cold-cranking amps | 210 CCA |
| Design | Non-spillable, higher vibration resistance (Cub Cadet claim) |
| Storage and cold weather | Cub Cadet says AGM holds its charge longer in storage and cold weather (no figure published) |
| Use | Engine starting in compatible Cub Cadet lawn tractors and zero-turn mowers |
| Recommended charger | AGM charger at 1.1 A / 14.8 V; no automotive charger (Cub Cadet manuals for AGM models) |
| Terminal hardware (tractor side) | Hex screws and square nuts, Phillips screwdriver (Cub Cadet manuals for AGM models) |
| Not confirmed in sources reviewed | Exact dimensions, weight, BCI group size, terminal torque, warranty term |
Capacity and CCA come from Cub Cadet’s battery pages and a parts dealer listing. Charger and terminal details come from Cub Cadet manuals for AGM-equipped riding mowers. Compare size and terminal layout with your old battery before buying.
XT1 LT46 Battery Replacement Difficulty
For a tractor that matches Cub Cadet’s manual, this is an easy job. The documented steps cover two cables, one hold-down rod and a lift-out, with no deck work, engine work or programming. The hardest part is picking the right battery. Tap a slice to highlight it.
- 20% Releasing the hold-down & lifting
- 25% Cables & terminals
- 40% Confirming the right battery
- 15% Final routing & start check
Difficulty score and effort split are an editorial estimate based on Cub Cadet’s documented procedure, not an official rating. No labor time is published.
How to Replace Your XT1 LT46 Battery
Tap each step to tick it off as you go. These steps follow Cub Cadet’s manuals for AGM-equipped riding mowers with this battery layout. If your tractor differs, follow the manual for your model.
- 1Park and power downPark on level ground, set the parking brake, disengage the blades, stop the engine and remove the key. Let hot parts cool. Cub Cadet’s manual also advises disconnecting the spark plug wire before servicing.
- 2Reach the batteryOn tractors matching Cub Cadet’s manual, the battery sits beneath the seat frame. Note the battery position and cable routing, or take a photo.
- 3Disconnect the negative cableRemove the black negative cable first. Move it clear of the post.
- 4Disconnect the positive cableSlide the red boot aside, then remove the red positive cable. Keep the screws and nuts.
- 5Release the hold-downPush the hooked end of the hold-down rod out of the fender tab on the right side of the battery, then flip the rod upward.
- 6Lift out the old batteryLift it out carefully. Compare the old and new batteries for size and terminal layout.
- 7Install the new batterySet the battery in the same position and secure it with the hold-down rod. If the date shown on the battery has passed, charge it before use, as Cub Cadet’s manual directs.
- 8Reconnect the cablesConnect the red positive cable first and refit the red boot. Connect the black negative cable last. The wiring harness should lie on top of the hold-down rod.
- 9Check and startReconnect the spark plug wire if you removed it, check that both cables are tight, then start the engine.
Check that both cable connections are clean and tight, with red on positive (+) and black on negative (–). A battery that sat discharged may also need a full charge from an AGM charger, because Cub Cadet notes the engine’s charging system may not fully recharge it.
Cub Cadet Models Listing This Battery
A Cub Cadet parts dealer lists battery 725P17335 for the models below, with the years shown. Always match your full model number, because a series name alone does not confirm fit.
- XT1-LT4613B6A9TTA10 · 2024
- XT1-LT46 KH13AKA9TTA10 · 2022–2024
- XT1-LT46 KH13APA9TTA10 · 2022–2023
- XT1 LT4213A6A9TSA10 · 2023–2024
- XT1 LT50 KH FAB13AQA1TLB10 · 2023
- XT1 GT54 KH FAB14AQA3TMA10 · 2022–2023
- XT2 LX42 KH FAB13APA1TEA10 · 2022–2024
- XT2 LX46 KH FAB13APA1TNA10 · 2023–2024
- XT2 GX50 KH FAB14AQA3TLA10 · 2022–2023
- Ultima ZT1-46 KH FAB17AREACNA10 · 2022–2023
- Ultima ZT2-54 KW FAB17AIEAC3A10 · 2022–2024
- Ultima ZT3-60 KW FAB17AZEAC5A10 · 2022–2024
- Ultima ZTX4-48 KH FAB47ASAAA6010 · 2022–2023
- Ultima ZTX6-54 KW FAB47RIAHA7010 · 2022–2023
- Ultima ZTXS6-60 KW FAB47RICHB8A10 · 2023–2024
Safety, Charging & Storage
Batteries contain sulfuric acid and can release explosive gas. Wear eye protection, keep sparks and flames away, and wash your hands after handling the battery and its terminals, which contain lead.
- Do not open or take apart the battery.
- Charge with an AGM charger at 1.1 A / 14.8 V, in a ventilated area. Do not use an automotive charger.
- Never connect or disconnect charger clips while the charger is switched on.
- For long storage, disconnect the negative cable, keep the battery clean and store it fully charged.
- Recharge the battery before you put the tractor back into service.
Battery for Cub Cadet XT1 LT46: FAQ
What battery does a Cub Cadet XT1 LT46 use?
It depends on the exact model and year. Cub Cadet Canada lists a 12V, 210 CCA AGM battery for the 2024 XT1 LT46 (13B6A9TTA10), and parts dealers list the 11 Ah AGM battery (725P17335 family) for several XT1 LT46 model numbers. Cub Cadet’s US page for model 13APA9TTA10 shows a 230 CCA lead-acid battery.
Does this battery fit every XT1 LT46?
No fit for every unit is confirmed. Dealer records list it for specific XT1 LT46 model numbers, and published specifications for the XT1 LT46 name are not uniform.
Is this a lithium battery?
No. It is a 12-volt AGM (Absorbent Glass Mat) lead-acid battery.
What charger should I use?
Cub Cadet’s operator’s manuals for AGM-equipped riding mowers call for an AGM battery charger at a recommended 1.1 A / 14.8 V. They say not to use an automotive charger.
Which cable do I disconnect first?
Disconnect the black negative cable first. When installing, connect the red positive cable first and the negative cable last.
Do I need to add water to this battery?
No. Cub Cadet’s manuals say not to open or disassemble the battery. Even so, keep the terminals clean and protected, and store the battery fully charged.
How long will this battery last?
Cub Cadet does not publish a service-life figure for this battery. Life depends on use, charging habits and storage.
