LiTime 12V 12Ah LiFePO4 Lithium Battery
The LiTime 12V 12Ah LiFePO4 battery is a rechargeable deep-cycle battery rated at 12.8V, 12Ah and 153.6Wh. LiTime sells it mainly for fish finders and other small 12V gear. It has a built-in 12A BMS and is not meant for engine starting.
This page contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.
Will This Battery Work in Your Device?
LiTime sells this battery as a replacement for 12V 12Ah lead-acid batteries. A matching size and voltage do not guarantee a fit; run this quick check before you buy.
Motors, scooters and UPS units need extra care. Startup current can pass the 12A limit, and a UPS may not accept a lithium battery. LiTime does not list approval for specific devices. For that reason, check your device manual or its maker. Never use this battery to start an engine.
LiTime 12V 12Ah Specifications
| Property | Detail |
|---|---|
| Brand / model | LiTime 12V 12Ah LiFePO4 lithium battery |
| Chemistry | Lithium iron phosphate (LiFePO4), rechargeable |
| Nominal voltage | 12.8 V |
| Rated capacity | 12 Ah |
| Rated energy | 153.6 Wh |
| Battery management system | Built-in 12A BMS |
| Max continuous discharge | 12 A |
| Max continuous charge | 12 A |
| Recommended charge current | 2.4 A |
| Charging method | CC/CV, 14.4 V ±0.2 V |
| Max output power | 153.6 W (LiTime rating) |
| 1-second surge discharge | 75 A |
| Internal resistance | ≤50 mΩ (LiTime product page) |
| Dimensions (L × W × H) | 5.94 × 3.86 × 3.74 in (about 151 × 98 × 95 mm) |
| Weight | About 3.42 lb (per LiTime product page) |
| Terminals | F2 (listed as “F2 Bolts” on LiTime’s page) |
| Housing / enclosure | ABS, IP65 listed (do not submerge) |
| Charging temperature | 0°C to 50°C (32°F to 122°F) |
| Discharging temperature | −20°C to 60°C (−4°F to 140°F) |
| Storage temperature | −10°C to 50°C (14°F to 122°F) |
| Cycle life claim | 4,000 cycles at 100% DoD; 6,000 at 80%; 15,000 at 60% |
| Advertised lifespan | Up to about 10 years (not the warranty period) |
| BMS protections | Overcharge, over-discharge, over-current, over-temperature, short circuit |
| Expansion | Up to 4 in series and 4 in parallel (identical batteries) |
| Not listed | Bluetooth, self-heating, low-temperature charging protection |
| Warranty | 3 years (LiTime US model page) |
| Listed certifications | FCC, CE, RoHS, UN38.3 |
All ratings are published by LiTime and were not independently tested. LiTime’s page gives two different five-second surge figures (40A and 50A). As a result, that rating is left out. Other LiTime pages list slightly different values for some items (for example ≤40 mΩ internal resistance and 3.2 lb weight), and warranty terms can vary by listing and region.
LiTime 12V 12Ah Replacement Difficulty
Difficulty depends on your device. A like-for-like swap in an easy-to-reach space is simple. The harder part is confirming that a LiFePO4 battery and its charger suit your device. Tap a slice to highlight it.
- 40% Checking compatibility
- 25% Matching the charger
- 20% Connectors & wiring
- 15% Fitting & securing
Difficulty score and effort split are an editorial estimate, not an official LiTime rating. UPS units, scooters, alarm panels and multi-battery banks are harder. Per the LiTime manual, the battery must not be opened or modified, therefore internal repair is not an option.
How to Replace Your Battery with the LiTime 12V 12Ah
This is a general checklist. Your device manual comes first. Tap each step to tick it off as you go.
- 1Check compatibilityConfirm 12V, a draw of 12A or less, a 151 × 98 × 95 mm space, F2 terminals and a LiFePO4-compatible charger.
- 2Power downTurn the device off and unplug the charger and any other power source, such as a solar controller.
- 3Disconnect the old batteryNote or photograph the polarity first. Then disconnect in the order your device manual gives.
- 4Remove and inspectTake out the old battery. Check connectors and wires for damage, corrosion or looseness.
- 5Install the new batterySecure it so it cannot move, with the terminal side not facing down. Connect the leads with the correct polarity and make sure the connectors fit the F2 terminals snugly.
- 6Test and chargePower on with a light load first. Charge only from 0°C to 50°C with a LiFePO4-compatible charger.
Check for a heavy startup load, loose connections, a low charge and an unsuitable charger. Do not open the case or bypass the BMS. If the battery will not charge, contact LiTime support.
Other Devices That Can Use This Battery
LiTime lists fish finders, scooters, security cameras, game machines and camping gear. Other listings add lights, fans, toys and alarm systems. None of these is a blanket approval; confirm voltage, current draw and charger in your device manual first.
- Fish findersMain listed use
- Camping gearSmall 12V accessories
- Security camerasCheck input voltage
- LED lights12V strips & lamps
- Small DC fansLow-draw 12V fans
- Alarm systemsCheck panel & charger
- Toys12V battery toys
- Children’s scootersCheck motor current
- Game machinesCheck your manual
- Solar chargingNeeds a charge controller
- Battery banksUp to 4 in series or parallel
Safety, Charging & Storage
LiTime says not to use this model to start engines. The 75A one-second surge rating does not change that. Never charge it below 0°C, and never immerse it. IP65 covers dust and water jets only.
- Charge with a LiFePO4 charger set to 14.4V ±0.2V, ideally at 2.4A.
- Charge only from 0°C to 50°C.
- Store at about 50% charge in a cool, dry place (10°C to 35°C preferred). For long storage, check and recharge it every 3 months.
- Never open, crush, modify or short-circuit the battery.
- Combine only identical LiTime batteries bought close together.
- Take a worn-out battery to a battery recycling point, not household trash.
LiTime 12V 12Ah LiFePO4 Battery: FAQ
What are the voltage and capacity of the LiTime 12V 12Ah battery?
LiTime rates it at 12.8V nominal, 12Ah and 153.6Wh.
Can it replace a 12V 12Ah lead-acid battery?
LiTime markets it as a replacement for 12V 12Ah lead-acid batteries, but you still need to check the charger, current draw, size, terminals and polarity of your device.
What charger does it need?
It needs a LiFePO4-compatible CC/CV charger set to 14.4V ±0.2V. LiTime recommends 2.4A and lists 12A as the maximum continuous charge current. A lead-acid charger may not suit it, because it needs a LiFePO4 profile.
How long does it take to charge?
At the recommended 2.4A, an empty battery needs roughly 5 hours (12Ah ÷ 2.4A). This is a calculation, not a tested figure, and real time varies.
Can it start an engine?
No. LiTime says not to use this model as a starter battery.
Can it be charged in freezing weather?
No. LiTime specifies charging only from 0°C to 50°C, and the listing does not confirm a low-temperature charging cutoff. Discharging is rated from −20°C to 60°C.
Is it waterproof?
LiTime lists an IP65 rating, which covers dust and water jets. It is not a submersion rating, which means the battery must never be immersed.
How long will it run my device?
A rough best-case figure is 153.6Wh divided by the device’s average power in watts. A 20W load gives about 7.7 hours at best. Real runtime is usually lower, as losses, temperature and device cutoff all reduce it.
Can I connect more than one battery?
LiTime supports up to four in series and four in parallel. Use identical batteries with the same brand, capacity and BMS rating, bought close together.
Can it replace a UPS battery?
Not on size and voltage alone. Follow the UPS maker’s guidance, because charging and protection behavior must be compatible.
What warranty does it have?
LiTime’s US product page lists a 3-year warranty for this model. Check the terms for your purchase and region.
