Power Wheels Replacement Battery 12 Volt
The Power Wheels 12-Volt 12-Ah Rechargeable Battery is a lead-acid replacement battery for compatible Power Wheels ride-on vehicles. Mattel lists it as product number 74777. Check that the connector and the battery listed in your vehicle manual match before you buy.
This page contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.
Will This Battery Fit Your Vehicle?
A 12-volt rating alone does not confirm fit. Your vehicle manual lists the battery it needs, and the vehicle’s connector must match the one pictured in the battery instructions. Run this quick check before you buy.
Do not assume every Power Wheels vehicle uses this battery. Some vehicles use two 6-volt batteries, and some 12-volt vehicles use a different battery version, such as one with an orange top. Match the battery your manual lists.
Power Wheels 12-Volt Battery Specifications
| Property | Detail |
|---|---|
| Brand / model | Power Wheels 12-Volt Rechargeable Battery (Mattel product no. 74777) |
| Amazon ASIN | B01MSD0N1W |
| Chemistry | Lead-acid (sulfuric acid electrolyte), rechargeable |
| Nominal voltage | 12 V |
| Rated capacity | 12 Ah |
| Charger | Power Wheels 12-volt charger with 12V-type connector, as supplied with the vehicle |
| Overload protection | Built-in, self-resetting thermal fuse |
| Fuse recovery | About 25 seconds after the pedal is released |
| First charge | At least 18 hours, no more than 30 hours |
| Charge after each use | At least 14 hours, no more than 30 hours |
| Storage charging | Charge before storage, then at least once a month |
| Storage temperature | -10°F to 75°F (-23°C to 24°C) |
| Average battery life | 1 to 3 years (Mattel average) |
| Handling | Adults only; heavy and contains acid |
| Warranty (Mattel booklet) | Six-month limited warranty; seller terms may differ |
| Dimensions / weight | Seller listings differ; check the label on your battery |
Values come from Mattel’s battery instructions, owner’s manuals and product support pages. Charging times apply to the standard charger; the Quick Charger has its own instructions. Mattel does not publish discharge current, fuse amperage or a runtime figure in the documents we reviewed, and revisions may differ by seller.
Power Wheels Battery Replacement Difficulty
For an unmodified vehicle, this is a basic job for an adult. The hard parts are choosing the right battery and handling its weight. Tap a slice to highlight it.
- 15% Opening the compartment
- 20% Swapping & reconnecting
- 40% Choosing a compatible battery
- 25% Charging before first use
The score and effort split are an editorial assessment, not an official rating. Tool needs and access steps depend on the vehicle model. Mattel does not publish a swap time in the documents we reviewed.
Get help from an authorized service center if the connector does not match, wires or connectors are damaged, the battery case is cracked or leaking, the retainer cannot hold the battery, or the vehicle has been modified.
How to Replace a Power Wheels 12V Battery
This is a general outline. Your vehicle manual has the exact steps for your model. Tap each step to tick it off as you go.
- 1Prepare the vehicleAn adult removes the rider, releases the pedal and unplugs any charger.
- 2Open the battery compartmentFollow your manual to open the hood, seat or cover. On the Jeep Wrangler (W9418), you turn the hood latches a quarter turn and lift the hood.
- 3Disconnect and remove the old batteryUnplug the motor-harness connector, release the retainer and lift out the battery. It is heavy and contains acid, so do not drop it.
- 4Check the new batteryExamine the case for cracks and confirm the connector matches the one pictured in the battery instructions. Do not charge or use a damaged battery.
- 5Charge before first useCharge it for at least 18 hours and no more than 30 hours with the Power Wheels 12-volt charger, following your manual.
- 6Install and secure the batterySet it in the compartment and secure it with the vehicle’s battery retainer.
- 7Reconnect and close upPlug the motor-harness connector into the battery, then close and secure the hood, seat or cover.
Check that the battery had its full charge, the connectors are tight and the charger works. If the vehicle stops mid-ride, the thermal fuse may have tripped. Release the pedal and wait about 25 seconds. If it keeps happening under normal use, have the vehicle checked.
Where This Battery Can and Cannot Be Used
This battery is made for Power Wheels vehicles. The examples below have owner’s manuals that list a 12-volt Power Wheels battery or charger system. Confirm the battery your own model’s manual lists before you buy.
- Jeep WranglerModel W9418, 12V system
- Hot Wheels Dune RacerModel W6201, 12V battery
- Dune RacerModel CBK89, 12V battery
- Barbie Dune RacerModel Y9367, 12V charger
- Other brands’ ride-onsNot a Power Wheels product
- UPS & alarm systemsNo approved use
- Mobility equipmentNo approved use
- DIY power projectsNo approved use
Mattel warns that using Power Wheels components in products other than Power Wheels vehicles could cause overheating, fire or explosion. Model examples are not a guarantee of fit for every production revision.
Safety, Storage & Disposal
Only adults should handle this battery. It is heavy and contains sulfuric acid, and dropping it could cause serious injury. Check the case for cracks before charging, and do not charge or use a damaged battery.
- Use only a Power Wheels 12-volt charger with the 12V-type connector.
- Charge for at least 18 hours before first use, and never more than 30 hours.
- Charge before storage and at least once a month, even when the vehicle is unused.
- Do not store the battery above 75°F (24°C) or below -10°F (-23°C).
- Recycle the old battery at a lead-acid collection point, not in household trash or a fire.
Power Wheels 12V Battery: FAQ
Does this battery fit every 12-volt Power Wheels vehicle?
Not automatically. A 12-volt rating alone does not confirm fit. The vehicle’s motor-harness connector must match the connector pictured in the battery instructions, and the vehicle manual lists the battery it needs.
Which charger should I use?
Mattel manuals say to use only a Power Wheels 12-volt charger with the 12V-type connector. Use the charger supplied with your vehicle.
How long should I charge a new battery?
With the standard charger, at least 18 hours and no more than 30 hours before first use. After each use, charge for at least 14 hours and never more than 30 hours. The Quick Charger has its own instructions.
How long does a Power Wheels battery last?
Mattel gives an average battery life of one to three years. Charging habits, battery care and total hours of use all affect it. No standard runtime per charge is published for this battery.
Why does my vehicle stop and then run again?
The built-in, self-resetting thermal fuse may have tripped after an overload or severe driving conditions. Release the pedal and wait about 25 seconds. If it keeps happening under normal use, have the vehicle checked.
How should I store the battery?
Charge it before storage and at least once a month, even when the vehicle is unused. Do not store it above 75°F (24°C) or below -10°F (-23°C).
Can I use a car battery charger or a lithium battery instead?
Mattel manuals warn that the wrong type of battery or charger could cause a fire or explosion, and they specify a Power Wheels 12-volt charger. Substitutes are not approved.
How should I dispose of the old battery?
Do not put it in household trash or a fire. Take it to a lead-acid battery recycling point and confirm with the site that it accepts it.