Battery Specs & GuidePS3
LIP1359Pickle Power PS3 Controller Battery 2 Pack LIP1359
AT A GLANCE

PS3 Controller Battery Replacement: Pickle Power LIP1359

The Pickle Power LIP1359 is an aftermarket 3.7V rechargeable lithium-ion battery for the Sony PS3 DualShock 3 controller. It is listed for the CECHZC2E and CECHZC2U models. A published repair guide shows the swap needs a Phillips screwdriver and no soldering.

3.7VListed nominal voltage
2Batteries in the kit
5Rear screws to remove
10 minPublished time estimate

This page contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.

01 / Compatibility

Will This Battery Fit Your PS3 Controller?

The listing names two controller models: DualShock 3 CECHZC2E and CECHZC2U. Related Pickle Power listings also advise comparing the plug size of your original battery. Run this quick check before you buy.

HEADS UP

Listings for this battery disagree on capacity. Some state 650mAh and others state 1800mAh. Check the label on the battery you receive, and do not assume a runtime gain over the original.

02 / Specifications

Pickle Power LIP1359 Specifications

PropertyDetail
Brand / modelPickle Power LIP1359
TypeAftermarket internal controller battery (not a Sony original)
Kit contents2 batteries, USB cable, tools
ChemistryLithium-ion, rechargeable
Nominal voltage3.7 V (listed)
CapacityListings conflict: 650 mAh and 1800 mAh. Check your battery’s label
Listed controller modelsSony PS3 DualShock 3 CECHZC2E, CECHZC2U
ChargingInside the controller, through its USB connection
Sony controller battery (for comparison)3.7 V, 610 mAh, built-in rechargeable lithium-ion
Controller input rating (Sony)DC 5 V, 500 mA
Charging temperature (Sony)10°C to 30°C
Operating temperature (Sony)5°C to 35°C
Controller USB cable (Sony)USB A to Mini-B
Not confirmedExact dimensions, weight, cycle life, charge-current limits, connector series

Pickle Power values are advertised in product listings and have not been lab tested. Rows marked Sony describe Sony’s own controller and original battery, not this replacement.

03 / Effort

PS3 Controller Battery Replacement Difficulty

A published DualShock 3 repair guide rates this job Moderate and estimates about 10 minutes. It needs a Phillips #00 screwdriver and no soldering. The trickiest parts are lifting the rear cover without popping off the L2 and R2 triggers, and unplugging the battery by its connector rather than its wires. Tap a slice to highlight it.

  • 30% Opening the rear cover
  • 20% Disconnecting the old battery
  • 25% Choosing a compatible battery
  • 25% Closing up & testing

The Moderate rating and 10-minute estimate come from a published repair guide. The 4/10 score and effort split are an editorial estimate, not an official rating.

04 / Install guide

How to Replace Your PS3 Controller Battery

BEFORE YOU START

Sony’s controller manual gives no battery replacement steps, which makes this an independent repair. Work carefully, and stop if the battery is swollen, leaking or damaged.

Tap each step to tick it off as you go.

  1. 1Switch off and unplugAs a precaution, switch the controller off and unplug the USB cable before you open it.
  2. 2Remove the rear screwsTurn the controller over and take out the five Phillips screws from the back. Keep them in a small dish.
  3. 3Lift off the rear coverPress on the centre of the rear cover, in the gap that separates the two analogue sticks, and lift its lower edge. Slide the cover slightly towards the top edge to clear the L2 and R2 triggers, then remove it.
  4. 4Disconnect the old batteryLift the battery just enough to reach the plug. Grip the connector body and pull it away from its socket. Tweezers can help. Never pull the red and black wires.
  5. 5Connect the new batteryCompare the new battery with the old one first. Plug it in, seat it in the battery space and check that no wires are pinched. Follow any holder instructions that come with the pack, and do not force anything.
  6. 6Close up and chargeRefit the cover and the five screws. With the PS3 switched on, connect the controller by USB cable and let it charge. The port indicators flash slowly while charging.
NOT WORKING?

Reopen the controller and check that the plug is fully seated and the wires are not trapped. Then try a known-good USB cable on a powered-on PS3 and press the PS button to pair the controller.

05 / Other devices

Which Controllers Can Use This Battery?

Only the DualShock 3 models named in the listing are confirmed. No fit has been verified for other devices. Always compare your old battery first.

  • DualShock 3 CECHZC2ENamed on the listing
  • DualShock 3 CECHZC2UNamed on the listing
  • Other DualShock 3 modelsCompare plug and size
  • Original SIXAXISNot named on the listing
  • Third-party PS3 padsFit varies by maker
  • DualShock 4 (PS4)No fit verified
  • DualSense (PS5)No fit verified
  • PlayStation MoveNo fit verified
Safety

Safety, Charging & Disposal

DAMAGED BATTERY

Stop using and charging any battery that is swollen or leaking. Do not puncture, crush or squeeze it into the controller. If you are unsure how to remove it safely, ask a professional repair service.

  • Charge the controller at 10°C to 30°C, as Sony recommends.
  • Do not force the rear cover shut if the battery sits badly.
  • Keep old lithium-ion batteries out of household rubbish and recycling bins.
  • Tape the terminals or bag each battery separately, then use a battery collection point.
FAQ

PS3 Controller Battery: FAQ

Can you replace the battery in a PS3 controller?

Yes. The DualShock 3 battery connects by a plug, and a published repair guide rates the job Moderate at about 10 minutes with no soldering. Sony’s controller manual gives no battery replacement steps, which makes this an independent repair.

Is the Pickle Power LIP1359 650mAh or 1800mAh?

Listings disagree. Some state 650mAh and others state 1800mAh. Check the label on the battery you receive.

Does it fit every PS3 controller?

No. It is listed for DualShock 3 models CECHZC2E and CECHZC2U. Compare the plug and size with your old battery first.

Do I get two batteries for one controller?

No. A DualShock 3 holds one battery. The kit supplies two, which lets you refresh two controllers or hold one back as a spare.

How do I charge the controller after fitting the battery?

With the PS3 switched on, connect the controller using a USB cable. The port indicators flash slowly while it charges.

Can this battery be used in a PS4 or PS5 controller?

No fit has been verified for the DualShock 4, DualSense or Move controllers. Pickle Power sells separate batteries for the DualShock 4 and DualSense.

How should I dispose of the old battery?

Do not put it in household rubbish or recycling bins. Tape the terminals or bag each battery separately, then take it to a battery collection or household hazardous-waste service.

Specifications are based on product listings, Sony’s DualShock 3 manual and a published repair guide, and may vary by region and batch.

Categorized in:

Game Controller Battery,

Tagged in:

, ,