Wasabi Power Battery 2-Pack for Canon LP-E6, LP-E6N
The Wasabi Power 2-pack gives you two rechargeable lithium-ion batteries for Canon cameras that take an LP-E6 or LP-E6N pack. Each battery is advertised at 7.2V and 2600mAh. The kit also lists a wall charger with plug adapters.
This page contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.
Will This Battery Work in Your Camera?
The product listing names specific Canon and Blackmagic models, and some newer cameras use different batteries. Run this quick check before you buy.
Canon says the original LP-E6 cannot power the EOS R5 Mark II, and it limits some features with LP-E6N and LP-E6NH packs. The EOS R6 Mark II, EOS R7 and EOS R5 C are not named in the product listing. In-camera USB charging and full EOS R5 burst speed are not confirmed for this battery.
Wasabi Power LP-E6 Specifications
| Property | Detail |
|---|---|
| Brand / model | Wasabi Power LP-E6, LP-E6N Battery (2-Pack) |
| Replaces | Canon LP-E6, LP-E6N |
| Chemistry | Lithium-ion, rechargeable |
| Nominal voltage | 7.2 V (advertised) |
| Capacity | 2600 mAh per battery (advertised) |
| Nominal energy | About 18.7 Wh per battery (calculated from 7.2 V × 2.6 Ah) |
| Batteries in pack | 2 |
| Battery communication | Described by Wasabi as “fully decoded”, showing remaining battery life and usage time in compatible cameras |
| Cell grade | “Premium Grade-A cells” (manufacturer claim) |
| Protection | Overcharge and short-circuit protection (manufacturer claim) |
| Kit contents | 2 batteries, wall charger, European plug adapter, car adapter |
| Charger output | 500 mA (per retailer listing) |
| Canon charger use | Advertised as compatible with original Canon chargers |
| Single-battery size and weight | Not confirmed. Check the battery label. |
| Warranty | 3 years (manufacturer policy) |
Voltage and capacity are manufacturer ratings, not independent test results. Runtime varies by camera, settings and temperature. Wasabi sells this pack as batteries only, with a wall charger, and with a dual USB charger, so kit contents depend on the version you order.
LP-E6 Battery Replacement Difficulty
Swapping the pack is a simple latch-and-slide job with no tools. The harder part is confirming your camera supports this battery. Tap a slice to highlight it.
- 15% Opening the cover and latch
- 15% Swapping the pack
- 45% Choosing a compatible battery
- 25% Checking seating & battery status
The difficulty score and effort split are an editorial assessment based on Canon’s battery-swap procedure, not an official rating. A swollen, damaged or stuck battery is not a routine swap.
How to Replace Your Camera Battery
Tap each step to tick it off as you go. The steps follow Canon’s EOS manuals. Door and latch positions differ by model.
- 1Power off and stop writingFinish recording, switch the camera off and wait until the card access lamp is off.
- 2Open the cover and remove the old batteryOpen the battery compartment cover, press the battery lock lever and take out the used battery. Fit its terminal cover if you have one.
- 3Insert the Wasabi batterySlide in a charged battery, contact end first, until it locks in place.
- 4Close the cover and checkClose the cover until it latches, switch the camera on and check the battery level display.
Blackmagic Pocket Cinema Camera 4K: push the locking tab toward the front to release the battery. Insert the new one with its contacts facing the terminals until it clicks in under the tab.
If the camera shows an irregular or unrecognized battery message, reseat the pack and test with a known-good battery. If the message stays, contact Wasabi support with your camera model, firmware version and the battery batch code.
Cameras That Use This Battery
These models are named in the product listing for this pack, plus one third-party camera that takes LP-E6 batteries. Confirm the battery type in your device manual first.
- EOS 5D Mark II / III / IVFull-frame DSLR
- EOS 5DS / 5DS RHigh-resolution DSLR
- EOS 6D / 6D Mark IIFull-frame DSLR
- EOS 7D / 7D Mark IIAPS-C DSLR
- EOS 60D / 60DaAPS-C DSLR
- EOS 70D / 80D / 90DAPS-C DSLR
- EOS RFull-frame mirrorless
- EOS RaAstrophotography model
- EOS R5Check feature limits
- EOS R6Original model only
- Canon XC10 / XC15Compact video cameras
- Blackmagic Pocket Cinema Camera 4KNot 6K Pro or 6K G2
- Blackmagic Pocket Cinema Camera 6KOriginal model only
- Yongnuo YN433Takes LP-E6, per Yongnuo
Safety, Storage & Disposal
If a battery is swollen, leaking or physically damaged, stop using it. Do not force it out of the camera, open it or try to repair it. Contact the manufacturer or a qualified service provider for handling advice.
- Never open, puncture, deform or solder the battery pack.
- Do not remove the battery while the card access lamp is lit or blinking.
- Fit the terminal cover when a battery is out of the camera.
- Take the battery out of the camera for long storage.
- Keep used batteries out of household trash and recycling bins.
- Tape the terminals or bag each battery, then use a battery collection point.
Wasabi Power LP-E6 2-Pack: FAQ
What does the Wasabi Power 2-pack replace?
It is a third-party replacement for the Canon LP-E6 and LP-E6N battery packs. Each pack is advertised at 7.2V and 2600mAh.
Is it a genuine Canon battery?
No. It is a Wasabi Power replacement. Canon recommends genuine batteries and notes that non-genuine batteries may prevent a camera from working at full performance.
How much capacity does each battery have?
Wasabi advertises 2600mAh at 7.2V for each battery, which works out to about 18.7Wh. These are manufacturer ratings. Real runtime depends on your camera, settings and temperature.
Does the kit include a charger?
The kit lists two batteries, a wall charger, a European plug adapter and a car adapter. Wasabi also sells the batteries alone and with a dual USB charger. Check the package listing before you order.
Can I charge the battery inside the camera over USB?
This is not confirmed for this battery. Canon allows in-camera USB charging only for certain genuine packs and not for the original LP-E6. Wasabi advertises compatibility with Canon original chargers.
Does it work in the Canon EOS R5 Mark II?
This is not confirmed. Canon says the original LP-E6 cannot power the EOS R5 Mark II and limits some features with LP-E6N and LP-E6NH packs. The R5 Mark II is not named in the listing for this pack.
What warranty does Wasabi offer?
Wasabi advertises a three-year warranty. Its US policy offers a refund or exchange within 30 days and a free replacement within 90 days. After 90 days, a shipping fee applies for a replacement. These terms are for US customers.
How should I dispose of an old LP-E6 battery?
Do not put it in household trash or recycling bins. Tape the terminals or bag each battery separately and take it to a battery collection or hazardous-waste service. Follow local rules outside the US.
