2015 Chrysler 200 Key Fob Battery: Deluxe CR2032 3V
Chrysler’s owner’s manual recommends one CR2032 battery for the 2015 Chrysler 200 key fob. This Deluxe Batteries pack is listed as a two-pack of CR2032 3V cells. The cell is 20mm wide and 3.2mm thick.
This page contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.
Will This Battery Work in a 2015 Chrysler 200 Fob?
Chrysler’s owner’s manual lists one CR2032 as the recommended replacement battery for the fob. The Deluxe listing is for CR2032 3V cells, which matches that battery type. Run this quick check before you buy.
The Deluxe listing says it fits most Jeep, Dodge, Ram, Chrysler, Fiat and Mopar remotes and asks you to confirm fit with its compatibility guide. If your fob is a replacement or aftermarket unit, check the battery marking and holder first. The pack does not include a key fob.
Deluxe CR2032 Specifications
| Property | Detail |
|---|---|
| Brand | Deluxe Batteries |
| Product | Key Fob Replacement Batteries, Pack of 2 (Amazon ASIN B0D6NPPHGG) |
| Battery type | CR2032 |
| Pack size | 2 batteries |
| Chemistry (standard CR2032) | Lithium / manganese dioxide (Li/MnO₂) |
| Rechargeable | No (standard CR2032) |
| Nominal voltage | 3 V |
| Dimensions (standard CR2032) | 20 mm diameter × 3.2 mm thick |
| Chrysler’s recommended battery | One CR2032 per fob (2015 Chrysler 200 owner’s manual) |
| Listed fitment | Most Jeep, Dodge, Ram, Chrysler, Fiat and Mopar/Stellantis remotes; confirm with the listing’s fit guide |
| Key fob included | No |
| Rated capacity | Not published by Deluxe |
| Shelf life / storage life | Not published by Deluxe |
| Operating temperature | Not published by Deluxe |
| Bitter coating / certifications | Not published by Deluxe |
Voltage, size and chemistry describe the standard CR2032 type, as documented by battery makers such as Panasonic, Maxell and Energizer. Capacity and other performance figures vary by brand, which is why we only list what is published for this product.
2015 Chrysler 200 Fob Battery Replacement Difficulty
This is a short, beginner-friendly job. You only need the fob’s emergency key or a #2 flat-blade screwdriver. The most delicate part is opening the case without damaging its seal. Tap a slice to highlight it.
- 35% Opening the case
- 20% Swapping the cell
- 15% Matching the + sign
- 30% Choosing the right battery
The difficulty score and effort split are an editorial estimate based on Chrysler’s documented procedure, not an official rating. Chrysler’s battery replacement instructions contain no programming step.
How to Replace a 2015 Chrysler 200 Key Fob Battery
Tap each step to tick it off as you go. Steps 1 to 4 follow the 2015 Chrysler 200 owner’s manual. Step 5 is a simple function check.
- 1Remove the emergency keySlide the mechanical latch on the back of the fob sideways with your thumb, then pull out the emergency key.
- 2Open the fobInsert the emergency key tip or a #2 flat-blade screwdriver into the slot and gently pry the two halves apart. Do not damage the seal.
- 3Swap the batteryTurn the back cover over so the battery faces down, then lightly tap it on a solid surface to release the old battery. Fit the new CR2032 so its + sign matches the + sign inside the battery clip. Avoid touching the battery terminals and the circuit board.
- 4Close the fobSnap the two halves together and slide the emergency key back in.
- 5Test the fobPress lock and unlock, then start the car as usual to confirm everything works.
Chrysler advises against touching the new battery with your fingers because skin oils may cause battery deterioration. If you do touch it, clean it with rubbing alcohol.
You can still get in with the emergency key. To start the car, hold the nose of the fob (the end opposite the emergency key) against the ENGINE START/STOP button, then press the button with the fob while following the normal starting steps. If the fob still fails after a fresh battery, ask an authorized dealer to check it.
Other Devices That Use a CR2032
CR2032 cells power many small electronics. Always confirm the battery type in your device manual before you swap.
- Car key fobsOnly models that specify CR2032
- Other Jeep, Dodge & Ram fobsCheck the listing’s fit guide
- Item trackersApple AirTag; see coating note
- Remote controlsModels that specify CR2032
- WatchesModels built for CR2032
- CalculatorsModels with a CR2032 slot
- Flameless candlesLED tea lights
- ToysSecure battery doors required
- ThermometersCheck your manual
- Glucose monitorsCheck your manual
- Medical devicesFollow the device manual
- Fitness devicesTrackers & accessories
- Security devicesCompact security products
- Wireless camerasModels that specify CR2032
Device categories follow Duracell’s CR2032 product page, with watches added from general CR2032 guides. Apple notes that some bitterant-coated CR2032 cells might not work with AirTag. The coating and AirTag compatibility of the Deluxe cells could not be verified.
Safety, Storage & Disposal
A coin battery stuck in the esophagus can cause severe damage in as little as two hours. Go to the emergency room right away if you suspect ingestion, even without symptoms. In the US, call the National Battery Ingestion Hotline at 800-498-8666 or Poison Help at 800-222-1222.
- Never recharge a CR2032 or burn it.
- Keep new and used coin batteries away from children and pets.
- Keep loose cells away from coins, keys and other metal objects.
- Cover the terminals with non-conductive tape or bag each cell separately.
- Take used cells to a battery collection point, not the household trash or recycling bin.
2015 Chrysler 200 Key Fob Battery: FAQ
What battery does a 2015 Chrysler 200 key fob use?
Chrysler’s owner’s manual recommends one CR2032 battery for the 2015 Chrysler 200 key fob. CR2032 is a 3V lithium coin cell.
Do I need one battery or two?
Each key fob takes one CR2032. The Deluxe pack contains two, which leaves a spare or covers a second compatible fob.
Do I need to reprogram the fob after changing the battery?
Chrysler’s battery replacement instructions have no programming step. The manual says programming key fobs or RKE transmitters is done at an authorized dealer.
How long will the battery last?
Battery life depends on how often you use the fob and on conditions such as temperature. Deluxe has not published a runtime figure. Replace the battery when the fob’s range or response drops.
Can I start the car if the fob battery is dead?
Yes, in most cases. Hold the nose of the fob, the end opposite the emergency key, against the ENGINE START/STOP button and press the button with the fob while following the normal starting steps in the manual.
Can I use a CR2025 or CR2016 instead of a CR2032?
No. Use the CR2032 that Chrysler recommends. A CR2025 and CR2016 share the same 20mm diameter but are thinner.
Is the CR2032 rechargeable?
No. A standard CR2032 is a non-rechargeable lithium/manganese dioxide cell and must never be recharged.
How should I dispose of a used CR2032?
Do not put it in household trash or recycling bins. Cover the terminals with non-conductive tape or bag each cell separately, then take it to a battery collection point. Keep used cells away from children.
