EGR V6 Battery for Dyson V6 Animal
The EGR V6 is an aftermarket 21.6V lithium-ion battery pack listed for Dyson V6 cordless vacuums, including the V6 Animal. It is advertised at 9,000 mAh, and the swap takes a Phillips screwdriver and the two original battery screws.
This page contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.
Will This Battery Work in Your Dyson V6?
EGR lists this pack for the Dyson V6 range, including the V6 Animal. Because it is not a genuine Dyson part, match your machine to the list before you buy. Run this quick check first.
This is an aftermarket battery. Dyson recommends genuine batteries and states that it does not warrant third-party batteries or parts. Dyson also says imitation parts may invalidate your warranty. EGR’s own product page states that the pack does not fit V7 or V8 machines.
EGR V6 Battery Specifications
| Property | Detail |
|---|---|
| Brand / model | EGR V6 (aftermarket, Dyson-compatible) |
| Chemistry | Lithium-ion, rechargeable |
| Nominal voltage | 21.6 V |
| Advertised capacity | 9,000 mAh (9 Ah) |
| Advertised energy | 194.4 Wh (21.6 V × 9 Ah) |
| Claimed runtime, normal mode | Up to 26 minutes |
| Claimed runtime, high-performance mode | Up to 8 minutes |
| Listed V6 models | V6 Slim, V6 Animal, V6 Absolute, V6 Motorhead |
| Listed model codes | SV03, SV04, SV05, SV09, DC58, DC59, DC61, DC62 |
| Mounting | Screw-secured pack; the V6 uses two Phillips battery screws |
| Genuine Dyson reference | Part 967810-23 (listed by Dyson for the SV04) |
| Not confirmed | Dimensions, net weight, charge time, cycle life, warranty terms |
Capacity and runtime are advertised figures from the product listing and have not been independently tested. The genuine Dyson part number is a reference only and does not mean the EGR pack is a Dyson part.
Dyson V6 Battery Replacement Difficulty
This is a moderate job. It needs a screwdriver and removal of the dust bin, but no soldering and no opening of the battery. iFixit rates its V6 battery guides Moderate. Tap a slice to highlight it.
- 20% Removing the dust bin
- 25% Removing & refitting two screws
- 30% Choosing a matching battery
- 25% Seating the pack & charging
The score and effort split are an editorial estimate, not an official rating. iFixit’s two V6 battery guides give different time estimates: 2–5 minutes and 20–40 minutes.
How to Replace a Dyson V6 Animal Battery
You need a Phillips screwdriver that fits the screw heads securely. iFixit’s SV04 guide uses a Phillips #2. Tap each step to tick it off as you go.
- 1Unplug the vacuumDisconnect it from the charger and the wall socket. Keep the trigger released throughout.
- 2Remove the dust binEmpty the bin. Press the red release catch to open its base, then press it again to free the bin from the cyclone. This exposes the lower battery screw.
- 3Remove the two screwsTake out the two Phillips battery screws: one in the lower recess exposed by the bin and one further back near the handle. Keep both.
- 4Pull out the old batteryPull the old pack straight down and out through the bottom of the handle. Do not twist it or pull the trigger.
- 5Fit the new batteryLine the EGR pack up with the bottom of the handle and press it in until it seats fully. Keep your hands clear of the nozzle, as the vacuum may run when the pack seats.
- 6Refit the screwsReinstall both screws and tighten until snug, without overtightening.
- 7Refit the bin and chargeLatch the bin back on and press the trigger briefly to confirm the vacuum runs. Then charge the new battery following the instructions supplied with it.
Pulsing does not always point to a worn battery. Dyson says it signals a blockage, which makes the cleaner head, wand and bin inlets the first places to check.
Dyson Models Listed for This Battery
The listing names these V6 variants and model codes. Confirm your own machine’s model before you order.
- V6 SlimNamed V6 variant
- V6 AnimalNamed V6 variant
- V6 AbsoluteNamed V6 variant
- V6 MotorheadNamed V6 variant
- SV03Model code
- SV04Model code
- SV05Model code
- SV09Model code
- DC58Model code
- DC59Model code
- DC61Model code
- DC62Model code
Names such as Animal, Absolute and Motorhead are also used on other Dyson generations. This pack is for the V6 only and is not listed for V7 or V8 machines.
Safety, Handling & Disposal
Lithium-ion packs can overheat or catch fire when faulty or damaged. In January 2024 the US Consumer Product Safety Commission warned people to stop using one other brand’s replacement packs for Dyson vacuums because of a fire hazard. That notice covers a different brand, yet Dyson links to it and advises buying genuine batteries only. Treat any aftermarket pack with care.
- Do not charge or use a pack that is swollen, leaking, hot or damaged.
- Do not open the casing or rebuild cells. Replace the complete battery module.
- Keep metal tools away from the battery contacts.
- Recycle the old pack through a battery recycler or household hazardous-waste programme.
EGR V6 Battery: FAQ
What is the EGR V6 battery for?
It is an aftermarket 21.6V lithium-ion replacement pack listed for Dyson V6 cordless vacuums, including the V6 Animal, Absolute, Motorhead and Slim.
Is the EGR V6 a genuine Dyson battery?
No. It is an EGR-branded compatible replacement. Dyson recommends genuine batteries and states that it does not warrant third-party batteries or parts.
Will it fit a Dyson V7 or V8?
No. EGR’s own product page for its V6 pack states that it does not fit V7 or V8 machines.
What is the capacity of the EGR V6 battery?
The listing advertises 9,000 mAh at 21.6V, which works out to 194.4 Wh. These are advertised figures and have not been independently tested.
How long does it run?
The listing claims up to 26 minutes in normal mode and up to 8 minutes in high-performance mode. No independent test of this pack was found. For comparison, Dyson lists up to 20 minutes for the V6 with non-motorised tools and 6 minutes in MAX mode.
Does pulsing mean the battery needs replacing?
Not necessarily. Dyson says pulsing signals a blockage. Check the cleaner head, wand and bin inlets first, with the vacuum unplugged.
Do I need to replace the filter at the same time?
No. The documented battery replacement does not involve the filter. If you wash it, Dyson says to use cold water and let it dry for at least 24 hours before refitting.
Can I use my original Dyson charger?
Fit with the original charger and dock has not been confirmed for this listing. Follow the charging instructions supplied with the battery.
How should I dispose of the old battery?
Take it to a battery recycler or a household hazardous-waste programme instead of putting it in the bin.
